Multiple Choice

The contact force exerted by a body A on another body B is equal to the normal force between the bodies. We conclude that

Athe surfaces must be frictionless
Bthe force of friction between the bodies is zero
Correct Answer
Cthe magnitude of normal force equals that of friction
Dthe bodies may be rough but they don't slip on each other
Correct Answer

Solution

For the contact force to be equal to the normal force, the surface need not to be friction-less.

But the force of friction between the bodies must be zero for the N to be equal to F.

This also tells that the the surface may be rough but they are not slipping on each other, It means that Friction is zero. Thus, Option (b). and (d). both may be correct.

For the contact force to be equal to the normal force, friction for the surface should not need to be zero. If the magnitude of the Normal force will be equal to the contact force this means that body is at rest.

Thus, Both the options (a). and (c). are not correct.


SIMILAR QUESTIONS

Friction

A block of mass $$m$$ is kept on a platform which starts from rest with a constant acceleration $$g/2$$ upwards, as shown in the figure. Work done by normal reaction on block in time $$t$$ is___?

Friction

A car moves at a constant speed on a rod as shown in figure. The normal force by the rod on the car is $${N}_{A}$$ and $${N}_{B}$$ when it is at the points $$A$$ and $$B$$ respectively.

Friction

A scooter starting from rest moves with a constant acceleration for a time $$\Delta t_{1}$$ ,then with a constant velocity for the next $$\Delta t_{2}$$ and finally with a constant deceleration for the next $$\Delta t_{3}$$ to come to rest. A 500 N man sitting on the scooter behind the driver manages to stay at rest with respect to the scooter without touching any other part. The force exerted by the seat on the man is

Friction

In about $$1915$$, Henry Sincosky of Philadelphia suspended himself from a rafter by gripping the rafter with the thumb of each hand on one side and the fingers on the opposite side (Fig.). Sinofsky's mass was $$79 kg$$. If the coefficient of static friction between hand and rafter was $$0.70$$, what was the least magnitude of the normal force on the rafter from each thumb or opposite fingers? (After suspending himself, Sinofsky chinned himself on the rafter and then moved hand-over-hand along the rafter. If you do not think Sincosky’s grip was remarkable, try to repeat his stunt.)

Friction

A student of weight $$667 N$$ rides a steadily rotating Ferris wheel (the student sits upright). At the highest point, the magnitude of the normal force $$\vec F$$ on the student from the seat is $$556 N$$. (a) Does the student feel “light” or “heavy” there? (b) What is the magnitude of $$\vec F$$ the lowest point? If the wheel’s speed is doubled, what is the magnitude $$F_N$$ at the (c) highest and (d) lowest point?

Friction

A circular-motion addict of mass $$80 kg$$ rides a Ferris wheel around in a vertical circle of radius $$10 m$$ at a constant speed of $$6.1 m/s$$. (a) What is the period of the motion? What is the magnitude of the normal force on the addict from the seat when both go through (b) the highest point of the circular path and (c) the lowest point?

Friction

A roller-coaster car at an amusement park has a mass of $$1200 kg$$ when fully loaded with passengers. As the car passes over the top of a circular hill of radius $$18 m$$, assume that its speed is not changing. At the top of the hill, what are the (a) magnitude $$F_N$$ and (b) direction (up or down) of the normal force on the car from the track if the car’s speed is $$v =1 m/s$$? What are (c) $$F_N$$ and (d) the direction if $$v = 14 m/s$$?

Friction

In Figure, a stuntman drives a car (without negative lift) over the top of a hill, the cross-section of which can be approximated by a circle of radius $$R = 250$$ m. What is the greatest speed at which he can drive without the car leaving the road at the top of the hill?

Friction

A marble is allowed to roll down an inclined plane from a fixed height. At the foot of the inclined plane, it moves on a horizontal surface (a) covered with silk cloth (b) covered with a layer of sand and (c) covered with a glass sheet. On which surface will the marble move the shortest distance. Give a reason for your answer.

Friction

A bead of mass $$m$$ is attached to one end of a spring of natural length $$R$$ and spring constant $$k=\cfrac{(\sqrt{3}+1)mg}{R}$$. The other end of the spring is fixed at point $$A$$ on a smooth vertical ring of radius $$R$$. Then normal reaction at $$B$$ just after it is release to move is

Contact Details